Vaporizing Dry Herbs or Vaporizing Concentrates?

Compatibility

vappinnggg

Vaporizing Dry Herbs

Vaporizers designed to heat the cannabis in its raw, bud form are known as dry herb vaporizers. Dry herbs of all sorts have been used for centuries for meditation, relaxation and medicinal purposes. Certain flowers and herbs (including cannabis) can dried, crushed and then inserted into a vape pen that is dry-herb capable. The vape’s oven chamber will heat up the dry herbs which will release a vapor which can then be inhaled. To get the most out of your vaporization experience, be sure to grind your material using an herb grinder to break your material down to create more surface area for the heat to reach.

Vaporizing Concentrates

Waxes, shatters, crumbles, and oils are a concentrated form of cannabinoids and terpenes and are therefore referred to as cannabis concentrates. Due to these products being a concentrated mix, you have needing a very small amount to get the same effect as you would with larger amounts of a less concentrated mix. If you are looking to vape concentrates you will need a vapor pen that is capable of doing so as not all vaporizers have this functionality. In fact, many vaporizer manufacturers now offer special attachments to convert standard ovens to be compatible with concentrates but it often costs extra.

Temperatures

Studies have found that the sweet spot for vaporizing cannabis is around 338°F, even though cannabinoids [the medicinal compounds found in the cannabis plant] begin to vaporize at 285°F. At this temperature the active cannabinoids in cannabis are converted to a vapor that can comfortably be inhaled as opposed to a joint which can burn as hot as 2000°F or higher.

While the exact amount of components released depends on the compounds present and the temperature, none of the toxic bi-products of smoking plant matter is present in the vapor. This means that vapor will have a much higher percentage of desired cannabinoid /terpenoid content when compared to smoke.

Many vaporizers typically feature a digital temperature control that allows you to alter the ratio (the term ratio is important here) of active components you’re vaporizing. When you ignite cannabis with a lighter, you are releasing all cannabinoids at once, often times destroying desirable cannabinoids and terpenes that give cannabis its unique flavor, smell, and effects. Since terpenoids have the lowest boiling point, around 132°F, they are typically the first compounds to be released by vaporizing. As such, if you are looking for a tasty, aromatic hit, you should select the lowest available temperature setting on your vaporizer and slowly work your way up to 350°F to finish off your material. As you approach the boiling points of other compounds, you are increasing the quantity of the compounds that is vaporized.

vape temps

It is important to keep in mind that even at temperatures below a compounds boiling point, vapor is still produced similar to the way boiling water releases wisps of water vapor before the boiling point is reached. The vapor is just present in lower ratios. Since vapor is not always visible at lower temperatures, you must judge what temperature to set the vaporizer at by the taste and smell of the vapor produced.

Although you will mostly find these temperature controls on convection units, temperature controlled conduction vaporizers are beginning to appear. While it is safe to assume that most displays do not represent the exact temperature, most are very close and is much more accurate than vaporizers without temperature control. It is also important to note that the displayed temperature is not actually a measurement of the temperature of the herb you are vaporizing.

 

How To Make Cannabis Oil With Rosin Tech

The rosin technique has been gaining a lot of traction in the online cannabis community as of lately and for good reason. Rosin is a solid form of resin that is obtained by adding pressure & heat to vaporize volatile liquid terpenes. Traditionally rosin is produced from pine and is used mainly to treat the bows on violins. However, this technique can be applied in other scenarios, such as creating solventless extractions from your dried herbs.

What Is Rosin? A Solventless Extraction Technique

Recently the rosin technique has been gaining a lot of traction in the cannabis industry as it is a simple and affordable way to produce a quality product, within seconds. This simple technique separates the resin from the plant material by using heat and pressure. The yields are much similar to other extraction techniques, ranging between 10-15% with flower and even more with dry sift/kief.

How To Make Cannabis Oil With Rosin Tech

The rosin technique is quick simple and affordable, allowing anyone to create quality solventless hash in a matter of seconds. To get started making rosin, one would only need a few basic tools in order to create a quality finished product, but not nearly as many as you need with other techniques. The tools needed to make rosin include:

  • Flat Iron (2+” with temperature control) or other heat/rosin press
  • Non-stick parchment paper
  • Collecting device (TI dabber, razor blade, etc.)
  • Processing material (flower, dry sift, bubble hash)
  • 25u micron screen

Rosin Tech Steps:

  • Step 1: Prepare your processing material by breaking it down to .2 – .5 increments. Cut 10-20 pieces of parchment paper in 4” x 8” strips. Preheat the flat iron to 200*F – 340*F (the lower the temp, the tastier the end-product). Lower temperatures (250°F- 300°F) = more flavor/terpenes, less yield, end material is more stable (shatter), where as higher temperatures (300°F- 335°F) = less flavor/terpenes, more yield, end material is less stable (sap). Some extraction artists claim the best way to make Rosin is at 302°F (150ºC), with 4-6 seconds of pressure, using just 0.25 gram samples in each run — but this process has not been confirmed by Medical Jane or any other official studies.
  • Step 2: Take one of the small increments that you prepared and wrap it in the center of the 25u micron screen. Place the screen with the product on a piece of parchment paper and then fold the paper over, leaving the product in the center. Place the parchment paper on the flat iron and apply pressure for 3-5 seconds directly on the product.
  • Step 3: Remove the pressure from the flat iron and take off the parchment paper, unfold the parchment paper. The starting product will be surrounded by the rosin, remove the product being careful to leave all of the rosin behind. Take your collecting device and scrape the parchment paper to collect all of the finished product.

This Guide may be helpful for those who learn better by watching.

Rosin Tech & The Future of Cannabis Concentrates

What role will rosin tech play in the future of the cannabis industry? Rosin tech allows anyone to easily create quality solventless hash. This presents the potential for patients, as well as at-home connoisseurs to have access to pure clean medicine in a matter of seconds. The process required to create rosin only allows for a limited amount at a time, however with an industrial heat press you can increase the load and overall the yield.

This technique is also a great way to process lower grade bubble hash and dry sift into top-shelf full melt. Overall the rosin technique has shown a lot of potential and we’re excited to see where things are headed.

What you need to know about vaporizers

Vaporizing, as it applies to medical marijuana, is the process of heating dried cannabis to a temperature just below its combustion point of 392°F. Although vaporizers have been around for some time now, it is only in the last five to ten years that the good way of vaporization have become widely known.

Proper cannabis use has noticeable health. In fact, nearly all of the health issues and problems associated with potentially harmful smoke (including carcinogens, tar, etc.) can be avoided if the herb is only heated to the point where the desired cannabinoids (typically found in the resin of the flower), are released without igniting/destroying the material. This is precisely what a vaporizer does.

Accordingly, a variety of devices have flooded the market. In fact, today there are numerous products to help facilitate this process including Pen Vaporizers, Portable vaporizer and Stationary vaporizers.Despite the wide selection, all vaporizers consist of a Heating source and a delivery system. Here we will explore each of the different types of vaporizers, heating sources, delivery systems, and look at which are the preferred choices for patients approaching vaporizing from a health/wellness perspective.

Pen Vaporizers

Pen vaporizers (or “vape pens”) are essentially small vaporizers shaped like a pen or e-cig. They are typically discrete, easy to use, and much cheaper than more robust portable vaporizers or stationary vaporizers — and for good reason. Vape pens almost always utilize conduction heating (as opposed to the preferred convection heating method), making it important that you understand how to operate it to ensure your product does not get overheated or even burned. There are a large number of vape pens on the market currently.

Portable Vaporizers

Portable vaporizers are growing in popularity as vape technology continues to develop/enhance. If you want to vape in many different locations or travel a lot, perhaps a portable vaporizer is for you. Slightly larger than a pen vape, a portable vaporizer is any vape that can be taken on the go. Convenience is key with these vaporizers and they can easily pack up and go with you wherever you want to go. The majority of portable vapes are rechargeable but there are also butane and flame options.

Desktop / Stationary Vaporizers

Desktop vaporizers (or “stationary vaporizers”) are generally “stay at home” vaporizers that typically need to be plugged in. Although these vaporizers aren’t portable, desktop vapes generally deliver much higher quality vapor through a convection heating source and offer many more features. For instance, you can only get balloon attachments for stationary vaporizers. Also, stationary vapes sometimes allow for group vape sessions as opposed to solo-vape sessions. They typically come equipped with larger bowls and more robust heating systems that make vaporizing herbs a relaxing and fulfilling experience.

Heating sources for some type of vaporizers

Heating Sources

 

800

Conduction Heating

Conduction heating works by utilizing direct contact of the herb with an electrically heated surface, often times solid metal or a screen. A common problem with vaporizers like this is burning of the herb due to poor heat distribution. It is very difficult to regulate the temperature with vaporizers that use conduction. Included in this category are e-cigs, vaporizer pens, and a majority of portable vaporizers currently on the market.

Convection Heating

Convection heating, on the other hand, works by passing precisely heated air over the dried herb, vaporizing the material more evenly and efficiently. This makes convection heating the preferred choice for many patients looking to get the most out of their vaporization experience. The herb never comes in touch with the heating part; instead air is either forced by a fan, or through inhalation, over the herbs and through the delivery system. Heating part for convection vaporizers are typically made out of ceramic, though some are made out of stainless steel or other types of metal. Ceramic heating part retain heat extremely well and are unaffected by cool air drawn through the system.

Radiant / Infrared Heating

Radiation vaporizers use radiant energy either produced by electricity or a light source to provide heat. The herb absorbs the radiant energy, increasing in temperature until its components vaporize. These types of vaporizers are more rare, and are on par with convection vapes in term of quality of vapor produAt the same time, the hot screen emits infrared rays that transfer additional heat across the herb.